Picture of HP TREND P.P.R. Fittings

HP TREND P.P.R. Fittings

Coming in all forms (sockets, elbows, tees, reducers, caps, etc.), these fittings are made for all types of piping at the highest operating pressure PN 20. Another key reason why the company chose to design and produce PN 20 fittings is the fact that high thickness (PN 20) allows the maximum best internal geometry of the fittings, thus reducing the value of hydraulic losses and significantly improving system flow. Also, this range features P.P.R. fittings with brass nickel-plated thread (male-female adaptors, male-female elbows with or without support, male-female tees).


  • Lifespan of more than 50 years, subject to appropriate use
  • They are manufactured at the highest rated pressure PN20 and come in a variety of forms (sockets, tees, reducers, caps, etc.)
  • Their high thickness allows the best internal geometry reducing the value of hydraulic losses and significantly improving system flow.
  • They do not corrode and are resistant when in contact with various chemicals.
  • They show low thermal conductivity, thus reducing heat loss in plumbing systems, as well as the creation of condensation on the outer surface, while increasing energy efficiency at the same time.
  • They assista in an installation time reduction by 30%, since they are lightweight and easy to assemble
  • They do not pose a health risk, as they are antibacterial and suitable for drinking water
  • They show low noise levels when transporting liquids
  • They are environment-friendly, as they can be recycled and incinerated safely


Heating Heating
Plumbing & Water Supply Systems Plumbing & Water Supply Systems
Air Conditioning Air Conditioning
Cooling Cooling
Underfloor Heating Underfloor Heating
Industrial Use Industrial Use
Solar Systems Solar Systems
Gas Distribution Gas Distribution
Irrigation Irrigation


For more information regarding Pricelists, Technical Data, Manuals & Warranties, please click here.